How To Repair A Chip On A Ceramic Mug

While many people will simply dispose of a ceramic mug that becomes chipped or broken, there are certain cases where a chipped mug is well worth saving. Whether your mug is a collectible item or a special gift, there are several reasons for wanting to fix a chipped mug instead of chucking it.

To repair a chip on a ceramic mug, you simply need to clean up the area and re-attach the missing chip with glue. Clear epoxy is an effective glue option. Super glue is also highly effective. If you don’t have the missing chip, use non-toxic nail polish or bicarbonate of soda to cover the chip.

Provided your ceramic mug has only suffered a minor chip and not a major breakage, you should be able to fix it in a way that is not overly noticeable. There are several ways to achieve this, so you simply need to find the method that works best for your individual situation.

How To Repair A Chip On A Ceramic Mug

If your favorite memorabilia mug has suffered a chip from years of use or a freak accident, rest assured there are ways to repair it. Say a beautiful mug gifted to you has suffered a terrible fate, do not despair – you can fix it yourself.

Provided the mug is not broken into countless pieces, you should be able to bring it back to a usable condition. Mugs can easily become chipped. This can occur from simply bumping the mug over on the table, hitting it in the wrong way with a metal utensil, or using it frequently over several years.

Suppose the mug in question has been used consistently in the dishwasher over several years. In that case, it may become more susceptible to becoming chipped. Chips can occur relatively easily. If a chip is left unattended, it can become a crack. There is also the potential for it to start harboring unwanted germs.

In most cases, glue is required to repair a chip on a ceramic mug. The type of glue used for repairing your mug is extremely important. It needs to be able to bond to porcelain or ceramic. Otherwise, it will be highly ineffective. The glue needs to be of the non-drip type that possesses high strength. It must be able to dry effectively to form a durable, transparent bond.

A repaired chip on a ceramic mug will be almost imperceptible to the naked eye if performed correctly.

Suppose you attempt to repair a chipped ceramic mug where the chipped segment has gone missing. In that case, there are a few repair options available to you.

However, the chances of covering up the chip completely are somewhat minimized if you do not have the missing piece. You can try using non-toxic nail polish in this instance. Alternatively, employ the use of baking soda to help you repair your ceramic mug.

Repairing A Chip On A Ceramic Mug Using Epoxy

If you opt to fix your chipped ceramic mug using epoxy, begin by roughening the chipped area. This will help provide grip for the epoxy. Once you have sufficiently roughened up the area, clean the chip using a Q-tip with acetone or alcohol. By using these chemicals, you will ensure no residue is left behind.

Clean it up properly to ensure it is free of any debris. Once complete, mix your clear epoxy and tint it to ensure a proper match with the color of the mug. This can be done using colored chalk or dry pigment. Once the color is properly matched, mix the two parts of the epoxy to ensure the adhesive is properly activated.

Drop some of the glue into the chip. Ensure it is just enough to fill the chipped area. Surface tension may cause it to bulge up slightly. This should, however, be no cause for concern. Before the glue becomes hard, ensure that it fills the chip properly. Allow the epoxy to harden overnight before sanding any excess.

Ensure the glue is flattened and smoothed to sit level with the mug. This is achieved through careful sanding. You can also opt to apply nail polish or spray varnish to the epoxy. By doing this, you will be able to seal the epoxy glue while matching the glossy finish of the mug.

Your mug should now be able to withstand normal usage. Ensure that you do not scour the chipped area with any abrasive cleaners.

Repairing A Chip On A Ceramic Mug Using Super Glue

Suppose you have chosen super glue to repair the missing chip on your ceramic mug. In that case, you are almost guaranteed a successful project. Begin by clearing the area of all dirt and debris. Once the work surface is clean and free of any dirt or other debris, you must clean the broken edges of the chipped section and the chip, respectively.

Clean the chipped section and the chip thoroughly to ensure they are completely free from any possible contaminants. If, when repairing the mug, there is any grease or dirt on your hands, or on either surface, a black line will be created once the pieces are glued together.

While many think that the black line is caused by the glue itself, it is caused by the presence of grease or dirt on either surface of the mug or on the hands of the person administering the repair.

Once the chip and the chipped section of the mug have been cleaned properly, apply your super glue. Fill the chipped section with the super glue carefully. Bear in mind that a squeeze bottle and a nozzle will allow for far more precision than other types of glue containers.

Once you have applied the super glue to the chip, leave it to dry. Once it has dried properly, remove any excess glue with a paper towel or cloth.

Remember that your mug might not be suitable for use with hot beverages once it has been repaired in this way.


Whether you have the missing chipped piece or not, there are various ways to repair your chipped ceramic mug. You can use super glue or epoxy, provided the area where you are doing the repair has been properly cleaned. If the chipped piece is missing, you can use non-toxic nail polish to cover it up. Alternatively, use the bicarbonate of soda method discussed above.


Similar Posts